Pen Turners Bundle - 3 Tools Developed for Turning Pens from Epoxy Resin, Acrylics and Hybrid Materials.

This3 tool set includes:

1.Simple Scraper I:

• It's the pen turners dream tool because you can make perfectly straight wave free pen barrels and match the pen bushing size quickerthen ever before, thanks to the wide cutters.
• Eliminate tool make and make long wave free lines that require little or no sanding.
• Create silky smooth profile transitions between inside and outside curves, as well as straight wave free lines.
• Makes a perfectly flat bottom with a smooth transition to the inner wall using the oval cutter, or a square inside box cornerusing the rectangular cutter.
• Creates a smooth finish with much less tearout and minimal sanding.
• It's the only tool needed to turn virtually any pen.
• Oval negative rake cutter (for epoxy/resin, hybrid and wood)- The negative rake grind also makes this cutter less aggressive. This reduces chipping in very hard materials (epoxy/resin), can reduce tear out in softer materials and provides a great finish in both man-made materials and harder woods. Because the negative rake grind is less aggressive, many people find it easier to use.

• Negative Rake carbide cutter size: 1.18" x .50" x .10" thick
  
• Tool measures 1" wide x 3/8" thick x 8" long. Handle tang is 3/8" square (fits in 1/2" hole) x 2.5" long, so tool length once it's in the handle is 5.5".
  
• Handle:Ships with 8" Aluminum Simple Start Handle - Tool and handle length is 13.5".

2. AR SSTH (Simple Turning and Hollowing Tool):

This turning and hollowing tool harkens back to the traditional gouge and features a round shaft with a round flat top carbide cutter. The classic “riding the bevel” technique, the same used as with a traditional gouge, produces great shear cutting action as opposed to a scraping cut that chips man made materials. This technique is the answer to cutting difficult materials as well as wood so it is the perfect tool for hybrid projects. Adjusting the rotation angle controls the aggressiveness of the shear cut. Plus, it has the added benefit of pointing the “ribbons” or shavings away from you so they do not hit you in the face or wrap around the turning, blocking your view of the tool and project. This tool is ideal for beginners as it is simpler to use and less aggressive than the Simple Shear Cutting Finisher.

• Ride/Rub the bevel on the workpiece, then raise the handle until it begins to cut.
• Rotate or roll the tool on the tool rest in the direction you are going to move.
• Cut slightly above the centerline of the lathe.
• ” Round Tool Shaft with 12mm Round Flat Top Carbide Cutter (search for AR SSTH for replacements)
• Tool is 4" long
• Handle:Ships with 8" AluminumSimple Start Handle - Tool and handle length is 12".

3. AR SSR (Simple Roughing Tool):

This simple to use tool with a square negative rake cutter on a square shaft is ideal for roughing and making straight lines and flat surfaces.

• Tool is held flat on the tool rest
• ” Square Tool Shaft with 11mm Square Negative Rake Carbide Cutter (search for AR SSR for replacements)
• Tool is 4" long
• Handle:Ships with 8" AluminumSimple Start Handle - Tool and handle length is 12".

Free Pen Kit and Blank Bundle Details:

• 1 Free random slimline pen kit
• 1 Free random color/material pen blank (can be simstone, inlace acrylester, poly resin, glow stonesz or other misc)
• 3 Tools with handles as described above.

Acrylic, Resin and Hybrid projects have changed the woodturning landscape.

Traditional carbide tipped tools did not perform well with these new materials, so we set out to make a solution. The birth of our Acrylic/Resin (AR) tool line came as a result of a lot of trials (and errors), turning all types of man-made and hybrid projects. The goal was to create tools that could be used to turn any of the man-made materials we could find, while giving the turner as much creative artistic ability as possible. A one size fits all approach did not produce the desired results across all the different materials available, including hybrid pieces.A nod back to a few early woodturning techniques with the development of carbide tools used like traditional gouges also proved to be a very successful and great approach.

Watch our Tool Demonstrations here:

A few things to keep in mind:

1. Turning acrylics takes longer than wood.
2. Shearing cuts proved to be very successful, where scraping cuts were not.
3. Introduce your cutting edge slowly, try not to “stab” the wood as plastics can shatter with this technique.
4. Increase your lathe speed and slow your tool presentation to the blank.
5. Work from the ends inward.

Make light cuts to reduce chip outs. Increase your aggressiveness as you get thefeel for it.